I kept hearing that temperature control is the most important thing to make good beer so i decided to make a temperature controlled fermenter out of an old fridge that i had. I went with the STC-1000 because they are cheap, can do heating and cooling, and I hear a lot of good things about them. I wanted to mount the STC right to the door of the fridge and have a switch to put the fridge back to "normal fridge mode" by request of SHMBO.
[/IMG]
Hole in the fridge cut using a dremel
other side of the hole with some of the plastic cut away
STC-1000 installed into the electrical box and wired up
the outlet wiring, one goes to the sensor and the other to the heater (fermwrap)
powered up and working, yes, its a party fridge
The switch up is power to STC, middle is off and down is fridge on
IT WORKS1!!
Hole in the fridge cut using a dremel
other side of the hole with some of the plastic cut away
STC-1000 installed into the electrical box and wired up
the outlet wiring, one goes to the sensor and the other to the heater (fermwrap)
powered up and working, yes, its a party fridge
The switch up is power to STC, middle is off and down is fridge on
IT WORKS1!!