Thought I'd share, as I feel like this project turned out nice and was super-easy. I wanted something to match my collar, which would be cheap and not require mods of any sort to my box. I used a pine 1x6, pine quarter-round, and a pine 1x2 from the Depot. Additionally I used a couple of cheap rubber bar liners, glue, stain and poly I had left over from my keezer collar. Only tools I used were a chop saw, sandpaper and a scraper. I mounted it with angle brackets and a few strong disk magnets I had around the house, and it's holding tight even with a few drinks sitting on it!
![20130928_151623_resized.jpg 20130928_151623_resized.jpg](https://cdn.homebrewtalk.com/data/attach/126/126600-20130928-151623-resized.jpg)
![20130928_174543.jpg 20130928_174543.jpg](https://cdn.homebrewtalk.com/data/attach/126/126601-20130928-174543.jpg)
![20131002_130024-1_resized.jpg 20131002_130024-1_resized.jpg](https://cdn.homebrewtalk.com/data/attach/126/126602-20131002-130024-1-resized.jpg)
![20131002_130643_resized.jpg 20131002_130643_resized.jpg](https://cdn.homebrewtalk.com/data/attach/126/126603-20131002-130643-resized.jpg)