JUST_BREW_IT
Well-Known Member
I just don't have the time to brew anymore so I'm selling all my gear. It's sat for a little over a year and is just taking up space.
I WILL NOT PART OUT. It's all or nothing. If I'm going to part this out I will just down size and keep enough to continue to do small batches.
Here's a run down of what I have. I brewed 10-20 gallon batches with this set up. I have all of the equipment to control fermentation temps and to keg large quantities.
BREWING
1.) 35 gal brew kettle (camlock fitting)
2.) Keggle (camlock fitting)
3.) 150 quart coleman extreme mash tun (camlock fitting)
4.) Therminator plate chiller(camlock fitting)
5.) 50' 1/2" copper immersion chiller
6.) 2 Chugger SS center outlet pump (camlock fitting)
7.) Bayou burner KAB6
8.) Barley Crusher Mill with electric drill
9.) Silicone hoses with camlock fittings
FERMENTING
1.) 3 better bottle carboys
2.) 2 fermenting buckets
3.) stc1000 custom temperature controller (cool/heat/power)
4.) DIY stir plate and Flask
KEGGING
1.) 6 ball lock corny kegs (2 handle)
2.) 20# COs tank
3.) Dual regulator
4.) Single regulator
5.) Misc beverage lines, picnic taps, seals, O-rings, poppits......
6.) Johnson Controls A419 temp controller
MISC
1.) rubber stoppers
2.) bomber bottles
3.) mason jars (washing yeast)
4.) glass mugs
5.) Bottle capper
6.) siphon
7.) hydrometer
8.) diy hop spider
If I parted this out I figure to make roughly $1500.
I'm looking for $1000 for this package.
I WILL NOT PART OUT. It's all or nothing. If I'm going to part this out I will just down size and keep enough to continue to do small batches.
Here's a run down of what I have. I brewed 10-20 gallon batches with this set up. I have all of the equipment to control fermentation temps and to keg large quantities.
BREWING
1.) 35 gal brew kettle (camlock fitting)
2.) Keggle (camlock fitting)
3.) 150 quart coleman extreme mash tun (camlock fitting)
4.) Therminator plate chiller(camlock fitting)
5.) 50' 1/2" copper immersion chiller
6.) 2 Chugger SS center outlet pump (camlock fitting)
7.) Bayou burner KAB6
8.) Barley Crusher Mill with electric drill
9.) Silicone hoses with camlock fittings
FERMENTING
1.) 3 better bottle carboys
2.) 2 fermenting buckets
3.) stc1000 custom temperature controller (cool/heat/power)
4.) DIY stir plate and Flask
KEGGING
1.) 6 ball lock corny kegs (2 handle)
2.) 20# COs tank
3.) Dual regulator
4.) Single regulator
5.) Misc beverage lines, picnic taps, seals, O-rings, poppits......
6.) Johnson Controls A419 temp controller
MISC
1.) rubber stoppers
2.) bomber bottles
3.) mason jars (washing yeast)
4.) glass mugs
5.) Bottle capper
6.) siphon
7.) hydrometer
8.) diy hop spider
If I parted this out I figure to make roughly $1500.
I'm looking for $1000 for this package.