saskman
Well-Known Member
What is the best way to clean the krausen out of a blow off tube?
blow off tube
- Thread starter saskman
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
c.n.budz
Well-Known Member
Run really hot water through it for awhile, soak in oxyclean, rinse, repeat if needed
OP
OP
saskman
Well-Known Member
thanks for the info will give it a shot
Go to a music store a buy a trombone snake - depending on how big your tubing diameter is. If you are under 5/8" ID you should be OK. It should cost under $10.
This style is nice because you can push and pull it through the tubing. You can also find a brush the right diameter, cut the handle off and tie a piece of good string to each end. Put a weight of some kind on one string end so you can drop it through the tubing. Then just pull the brush through.
This style is nice because you can push and pull it through the tubing. You can also find a brush the right diameter, cut the handle off and tie a piece of good string to each end. Put a weight of some kind on one string end so you can drop it through the tubing. Then just pull the brush through.
Similar threads
