It pains me in a deep way to do this but I'm going to be selling all of my homebrewing gear... Everything you'll need to move up from extract brewing to all grain. I'm not trying to make a huge amount of coin on this - I'd rather see a new brewer take the hobby to the next level and enjoy it like I have. Prices are negotiable; combinations welcome. That said, I know what these things are worth and I'm not just going to give things away
My area code is 18977, all this stuff will be pickup only since homebrew gear tends to be huge and heavy.
Here's the gear:
- Little Giant 3 MD HC pump, including all quick disconnect fittings and silicone tubing. Don't be a slave to gravity! $250 for the whole setup.
- CO2 tank and regulator. Link to the regulator is http://www.micromatic.com/draft-keg-beer/regulators-pid-842.html. The tank is a standard one. I also have all the fittings and tubing to connect to a corny keg; as well as the tap and the corny. Everything you need to keg a 5gal batch! $150.
- Counter-flow chiller. 25' I believe. Standard build - copper innards, garden hose fittings. $50.
- 15gal keggle, with fittings and ball valve. It's a little dented up but works great. This was a bear to build. $80
- Two 5gal glass carboys - $30 each; 50 for both
- One 3gal glass carboy - $20 (this baby's an antique!)
- Cases of bottles - $10 each
- 5gal round mash tun - $25
- Free with purchase of other things: siphons, caps, capper, bottling wand and bucket, stoppers, hydrometers, sanitizers... etc etc, I'm sure I have things I'm forgetting about.
PM me if you're interested and I'll give you a phone number or an email! Pics upon request I suppose, but everything here looks like you'd expect it to. Everything is in good condition, too - I've used it all at various points over the summer.
-Drew
My area code is 18977, all this stuff will be pickup only since homebrew gear tends to be huge and heavy.
Here's the gear:
- Little Giant 3 MD HC pump, including all quick disconnect fittings and silicone tubing. Don't be a slave to gravity! $250 for the whole setup.
- CO2 tank and regulator. Link to the regulator is http://www.micromatic.com/draft-keg-beer/regulators-pid-842.html. The tank is a standard one. I also have all the fittings and tubing to connect to a corny keg; as well as the tap and the corny. Everything you need to keg a 5gal batch! $150.
- Counter-flow chiller. 25' I believe. Standard build - copper innards, garden hose fittings. $50.
- 15gal keggle, with fittings and ball valve. It's a little dented up but works great. This was a bear to build. $80
- Two 5gal glass carboys - $30 each; 50 for both
- One 3gal glass carboy - $20 (this baby's an antique!)
- Cases of bottles - $10 each
- 5gal round mash tun - $25
- Free with purchase of other things: siphons, caps, capper, bottling wand and bucket, stoppers, hydrometers, sanitizers... etc etc, I'm sure I have things I'm forgetting about.
PM me if you're interested and I'll give you a phone number or an email! Pics upon request I suppose, but everything here looks like you'd expect it to. Everything is in good condition, too - I've used it all at various points over the summer.
-Drew