Hi
I picked up this e-keggle system last year, but it's been quite the work in progress. It's required a lot of tinkering, and I just don't want to do it anymore. I'm going to upgrade to a Spike solo, but I need to make room.
Full disclosure, something is causing the circuit breaker to trip when either element is on - I suspect it may be overheating. I've tried to account for this in my pricing. Happy to provide more pictures, and will provide further discounting for anyone that is interested in the full lot.
I picked up this e-keggle system last year, but it's been quite the work in progress. It's required a lot of tinkering, and I just don't want to do it anymore. I'm going to upgrade to a Spike solo, but I need to make room.
Full disclosure, something is causing the circuit breaker to trip when either element is on - I suspect it may be overheating. I've tried to account for this in my pricing. Happy to provide more pictures, and will provide further discounting for anyone that is interested in the full lot.
| Part | Count | Retail cost | Asking price total |
| Heating Element, 5500 watt 1.5'' TC INTEGRATED Ripple V2 | 2 | 69*2 | 100 |
| March pump | 2 | 100x2 | 50 |
| similar but not be exact to https://ebrewsupply.com/collections/30a-control-panels/products/30a-pid-control-panel-2-elements | 1 | 1650 (1100 parts alone) | 700 |
| RTD sensor Cable, XLR to QD, Silicon Cable 3m Red | 3 | 18 | 18 |
| ekeggle boil kettle, welded TC 1.5" port, weldeded 2 NPT ports horizontal bottom, sightglass+temp dial, weldless temp probe | 1 | 200 | 120 |
| bottom draining mash tun keggle, 1 hole for weldless fitting near top | 1 | 150 | 75 |
| eKeggle hot liquor tank, for HERMS, have original HERMS coil + stainless TC coil I was going to replace with. Welded TC port for element | 1 | 200 | 100 |
| eKeggle hot liquor tank, 2 weldless ports and 1 welded NPT bottom. | 1 | 200 | 100 |
| 18" RIMS tube with element and camlock connection | 1 | 119 | 80 |
