Hoosierbilly
Well-Known Member
Selling my 5-10gal setup as I find myself doing mostly 2.5gal batches. I have only brewed maybe 10 times on these vessels. They are in like-new condition, no cuts, nicks, dents, dings, scorch marks, or discoloration. They look the same as the day I got them. Has been a great setup, efficiency seems to be around the low 80's. Only used with electric elements, haven't been used with propane so no discoloration.
I have been using 5500w elements and my 50amp control panel from my 1bbl rig, these don't come with it.
These kettles can be used with electric or gas. For an electric set up you will need to supply two heating elements, a controller for one element, and one pump, although two pumps would be better. For gas setup you will need a burner and one pump, although two would be better.
I can throw in an unopened dark star burner that I have and two chugger pumps that don't have the pump heads, motors only.
9 gal HLT, volume to the top is about 10 gal
https://conical-fermenter.com/9-Gal...arkings-and-Upper-Tangential-Fitting-422.html
9 gal MT
https://conical-fermenter.com/9-Gallon-Mash-Tun.html
10" sparge arm
https://conical-fermenter.com/Sparge-Arm-10.html?cat=30
15 gal BK, element sits between the 3 gal and 4 gal marks, volume to the top is about 16 gal
https://conical-fermenter.com/BK15TW-TI-LL-EL1.html
I paid $1603.92 after shipping just for the 3 vessels
Asking $1300. All the necessary valves, triclamps, gaskets, and fittings, two chugger pump motors without pump heads, and dark star burner if wanted.
Chiller not included but will throw in for another $100 if wanted.
Located in central IN.
Let me know of any questions you have. Good luck. Cheers!
I have been using 5500w elements and my 50amp control panel from my 1bbl rig, these don't come with it.
These kettles can be used with electric or gas. For an electric set up you will need to supply two heating elements, a controller for one element, and one pump, although two pumps would be better. For gas setup you will need a burner and one pump, although two would be better.
I can throw in an unopened dark star burner that I have and two chugger pumps that don't have the pump heads, motors only.
9 gal HLT, volume to the top is about 10 gal
https://conical-fermenter.com/9-Gal...arkings-and-Upper-Tangential-Fitting-422.html
9 gal MT
https://conical-fermenter.com/9-Gallon-Mash-Tun.html
10" sparge arm
https://conical-fermenter.com/Sparge-Arm-10.html?cat=30
15 gal BK, element sits between the 3 gal and 4 gal marks, volume to the top is about 16 gal
https://conical-fermenter.com/BK15TW-TI-LL-EL1.html
I paid $1603.92 after shipping just for the 3 vessels
Asking $1300. All the necessary valves, triclamps, gaskets, and fittings, two chugger pump motors without pump heads, and dark star burner if wanted.
Chiller not included but will throw in for another $100 if wanted.
Located in central IN.
Let me know of any questions you have. Good luck. Cheers!