---Sold---
I have my 3 tap keezer for sale in the Twin Cities. I have had a great time building and using it, but I need a little more room to do some lagers.
I can either sell it with all the hardware (taps, shanks, hoses, disconnects) or without them. If you want to put your own faucets in that's fine with me, I can always reuse what I have in this one on the new one.
Right now in the freezer I have 2 kegs, a CO2 bottle. and a Nitro Bottle. It very easily fits 3 kegs with both bottles. I'm not sure about 4 kegs with no Nitro bottle. I only have the three kegs to test it with (although Ill be getting another one in a few days).
It has one perlick stainless faucet, one ventimatic stainless faucet and a Stout faucet with Stainless spout. The beer lines are Bev-seal ultra, shanks are 4" Stainless, tailpieces are stainless, stainless (removable) drip tray. Another interesting thing I did with it is not attach a single thing to the freezer. The whole collar can come off. It is sealed with foam strip on the bottom and slides over the freezer. This makes it MUCH easier to move since you can do it in two pieces.
This does not come with either of my gas bottles as I am going to use them in my new setup, nor my kegs.
SWMBO will not let me start on the new one until I sell this one. Shes mean.
I'm looking for $450 for everything, or $200 for the freezer/collar.
This is a Pic early on in the building process which shows the 3 kegs and two bottles.
Here's a video I made because I was ridiculously excited about having nitro at home.
[ame]http://youtu.be/NIdGqnB8jko[/ame]
I have my 3 tap keezer for sale in the Twin Cities. I have had a great time building and using it, but I need a little more room to do some lagers.
I can either sell it with all the hardware (taps, shanks, hoses, disconnects) or without them. If you want to put your own faucets in that's fine with me, I can always reuse what I have in this one on the new one.
Right now in the freezer I have 2 kegs, a CO2 bottle. and a Nitro Bottle. It very easily fits 3 kegs with both bottles. I'm not sure about 4 kegs with no Nitro bottle. I only have the three kegs to test it with (although Ill be getting another one in a few days).
It has one perlick stainless faucet, one ventimatic stainless faucet and a Stout faucet with Stainless spout. The beer lines are Bev-seal ultra, shanks are 4" Stainless, tailpieces are stainless, stainless (removable) drip tray. Another interesting thing I did with it is not attach a single thing to the freezer. The whole collar can come off. It is sealed with foam strip on the bottom and slides over the freezer. This makes it MUCH easier to move since you can do it in two pieces.
This does not come with either of my gas bottles as I am going to use them in my new setup, nor my kegs.
SWMBO will not let me start on the new one until I sell this one. Shes mean.
I'm looking for $450 for everything, or $200 for the freezer/collar.
This is a Pic early on in the building process which shows the 3 kegs and two bottles.
Here's a video I made because I was ridiculously excited about having nitro at home.
[ame]http://youtu.be/NIdGqnB8jko[/ame]