After exhaustive research and a few headaches, I figured it was time to ask ask a few questions!
I'd like to install a PID controller, SSR with heatsink, thermocouple and a simple on/off switch to this 5500 watt element, all in this box.
First of all, does that all look right, electrically speaking? Anything else I need? I know some people use a terminal block. Do I need one for this application?
As far as electric goes, this involves my second question. I'm running on a 208v circuit. It will be wired to our specification, I was thinking 10/3 wire with a 30amp gfi breaker. Sound good? The 5500 watt element will run at 4131 watts at 208v, which is more than enough for what I need. Anything else I should know when talking to my electrician about 208v vs 240?
I'd like to install a PID controller, SSR with heatsink, thermocouple and a simple on/off switch to this 5500 watt element, all in this box.
First of all, does that all look right, electrically speaking? Anything else I need? I know some people use a terminal block. Do I need one for this application?
As far as electric goes, this involves my second question. I'm running on a 208v circuit. It will be wired to our specification, I was thinking 10/3 wire with a 30amp gfi breaker. Sound good? The 5500 watt element will run at 4131 watts at 208v, which is more than enough for what I need. Anything else I should know when talking to my electrician about 208v vs 240?