Hi all,
I am downsizing quite a bit, so I am selling my whole system to make room for other life commitments. Here are the details on my system:
3 Vessel HERMS System with 30amp Control Panel
Kegs were polished and fitted with weldless fittings (kegs obtained legally; not by deposit).
5500w Stainless Steel ULWD Ripple Heating Elements in HLT & BK; custom Tri-Clover fittings for easy removal; Heating element power cables are twist locks and remove from the elements as well.
Mash Tun has perforated stainless steel false bottom; BK has whirlpool arm installed.
All kettles have hi-flow diptubes installed.
50ft Stainless Steel HERMS Coil in HLT.
Control Panel is a 30amp (one element at a time) and requires 220v 50amp GFI protected breaker; also has integrated timer and alarm.
Control panel includes all power connections & thermoprobe connections.
All liquid connections for the Brew System are Camlock, and all hoses are hi-temp silicone.
Two Chugger pumps controlled by Control Panel; one for wort and one for water.
Stainless Steel Brewing Table included.
Fermentation System
2 1/2 Barrel SSbrewtech BME Chronical Fermenters
Includes FTS temperature control systems for both fermenters.
Includes 1/3 HP Glycol Compressor; will run 4 fermenters at one time.
Fermenters include 10" Leg Extensions.
All connections are Tri-Clover, except for the glycol connections (barbed).
CIP Spray Ball included for easy cleaning.
This system works as well as any out there and consistently runs a 92%-95% efficiency depending on the beer being brewed. It provides highly repeatable results and can handle pretty much any thing you throw at it.
All in all I paid around $7500 to put this system together, and will let it go for $5500.
I will sell the brew system and the fermenting system separately for $3600 and $1900 respectively, but I will not sell the individual components.
I'm located in Tampa, FL and it would be a local pick up.
Thank you for looking and let me know if there are any questions.
Michael
I am downsizing quite a bit, so I am selling my whole system to make room for other life commitments. Here are the details on my system:
3 Vessel HERMS System with 30amp Control Panel
Kegs were polished and fitted with weldless fittings (kegs obtained legally; not by deposit).
5500w Stainless Steel ULWD Ripple Heating Elements in HLT & BK; custom Tri-Clover fittings for easy removal; Heating element power cables are twist locks and remove from the elements as well.
Mash Tun has perforated stainless steel false bottom; BK has whirlpool arm installed.
All kettles have hi-flow diptubes installed.
50ft Stainless Steel HERMS Coil in HLT.
Control Panel is a 30amp (one element at a time) and requires 220v 50amp GFI protected breaker; also has integrated timer and alarm.
Control panel includes all power connections & thermoprobe connections.
All liquid connections for the Brew System are Camlock, and all hoses are hi-temp silicone.
Two Chugger pumps controlled by Control Panel; one for wort and one for water.
Stainless Steel Brewing Table included.
Fermentation System
2 1/2 Barrel SSbrewtech BME Chronical Fermenters
Includes FTS temperature control systems for both fermenters.
Includes 1/3 HP Glycol Compressor; will run 4 fermenters at one time.
Fermenters include 10" Leg Extensions.
All connections are Tri-Clover, except for the glycol connections (barbed).
CIP Spray Ball included for easy cleaning.
This system works as well as any out there and consistently runs a 92%-95% efficiency depending on the beer being brewed. It provides highly repeatable results and can handle pretty much any thing you throw at it.
All in all I paid around $7500 to put this system together, and will let it go for $5500.
I will sell the brew system and the fermenting system separately for $3600 and $1900 respectively, but I will not sell the individual components.
I'm located in Tampa, FL and it would be a local pick up.
Thank you for looking and let me know if there are any questions.
Michael
Attachments
Last edited: