Indiana 1 bbl brewery with fermenter $8,000

[Hoosierbilly]

I am selling my 1BBL brewery. I down graded from 2bbl to 1bbl but I find it sits around more than it is brewed on. I have brewed probably 10 batches with this setup. Not my first set of stainless vessels, very well cared for, in like-new condition, no dents, nicks, scratches, or discoloration. Cleaned with BKF and stored inside. I get efficiency in the low 80’s. I find myself doing more smaller batches and would like to see this put to use in a brewery where it belongs. This uses a 50 amp 4-prong outlet. The control panel is the electric brewery 50amp control panel for 30+ gallons that was pre-asymbled by them, with their control panel power cord.

https://shop.theelectricbrewery.com...ry-control-panel-for-30-gallons-pre-assembled
https://shop.theelectricbrewery.com/products/control-panel-power-cord-50a-pre-assembled
The vessels are stout tanks:
40gal HLT, similar to this except with 2 element ports

https://conical-fermenter.com/1-bbl-hot-liquor-tank-HL40TW-HC-SG-379.html
40gal MT and 12″ sparge arm

https://conical-fermenter.com/1-bbl-Mash-Tun-486.html
https://conical-fermenter.com/Sparge-Arm-12.html
45gal BK

https://conical-fermenter.com/45-Ga...et-Sight-Glass-Electrical-Ports-and-legs.html
The control panel connects to 4 5500w all stainless elements (two in HLT and two in BK) with grounded TC connections. Two twist lock cords included for powering pumps.

https://shop.theelectricbrewery.com...-5500w-240v-camco-02935-straight-bare-element
https://www.brewhardware.com/product_p/etc3.htm
Each vessel has a TC temp sensor with color coded cables to the control panel (Red for mash, white for water, blue for boil)

https://shop.theelectricbrewery.com...1-5-tri-clamp-temperature-probe-pre-assembled
For recirculating, whirlpooing, and cooling in the BK is a march nanobrewery pump.

https://www.morebeer.com/products/m...haJEt0Xp1Fqx18O30BP8f1iJc3pal7ZhoChhEQAvD_BwE
For mash recirculation is a 12v DC pump

https://www.brewershardware.com/Pumps/topsflo-dc-brewing-pumps/
Jaded Hydra Chiller

https://jadedbrewing.com/products/the-hydra
SSbrewtech 1bbl chronical brewmaster edition with cooling coil and neoprene sleeve

https://www.morebeer.com/products/s...RbZg1wki0dnR76GRNAzd6XGRsYe5laPxoC7AsQAvD_BwE
Included is all silicone hoses, hose clamps, triclamps, gaskets, and any and all fittings needed for brewing. No plastic or pvc touches the wort, only stainless and silicone.

Asking $8,000. Equipment is in like-new condition, only brewed on about 10 times. Located in central IN, local pickup only. Good Luck. Cheers!

 

[Jaybird]

Nice set up! I know its an optical illusion but those tanks look oblong to me...Maybe I have CSS... LOL

Good luck with the sale.

Cheers
Jay

 

[Hoosierbilly]

Nice set up! I know its an optical illusion but those tanks look oblong to me...Maybe I have CSS... LOL

Good luck with the sale.

Cheers
Jay

Haha yep, I can't unsee that now. Cheers

 

[Gilbert Spinning Horse]

Tempting, but I just checked on Google maps and got the message - "Sorry, we could not calculate driving directions from "São Paulo, Brazil" to "Indianapolis, Indiana, USA".
It does look like a fair old drive though.

 

[Hoosierbilly]

Tempting, but I just checked on Google maps and got the message - "Sorry, we could not calculate driving directions from "São Paulo, Brazil" to "Indianapolis, Indiana, USA".
It does look like a fair old drive though.

Looks like it's about an 81 hour, 4,050 mile drive to the Terminus of the Panamerican Highway, then about a 100 mile hike, then another 112 hour, 4,840 mile drive. Lugging all this by foot for 100 miles would be less than ideal. Let me know what you decide haha

 

[Gilbert Spinning Horse]

Let me think about it mate, it is a lovely kit and the price is a steal, but I'm married so.....

 

[Hoosierbilly]

 

[Hoosierbilly]

 

[Hoosierbilly]

Bump

 

[Hoosierbilly]

Bump

 

[MotivationDedication]

Hey Billy! Hope all is well. Sent you a PM

 

[Alexholsch]

hey, so electrical stuff in Mexico is a pain the ass but im really interested in the ss 1 bbl fermenter you still got it?

 

[Hoosierbilly]

Bump

 

[brandenholder]

Hey there! We're working on a nanobrewery start-up here in central Indiana and I wanted to see if your 1 BBL system was still available?

 

[Hoosierbilly]

Oh awesome! It sure is

 

[brandenholder]

Perfect, let me get with my investor and see what we can do. I'll be in touch very soon! (Not sure if email is kosher on here as I've always been a lurker, but if it would make it easier to communicate that way, we can do that).

 

[Hoosierbilly]

No worries. Sounds like a plan. Text would be the quickest way to get ahold of me. Sometimes I don't see my messages on here for a while. 765-749-4724
Thanks
-Jon

 

[Hoosierbilly]

Bump

 

[Hoosierbilly]

Bump

 

[tydaddy]

Still haven't sold this thing?! Crazy.

 

[Hoosierbilly]

Nope not yet, I haven't been very persistent with keeping the listing very active. You got your money saved up for it? Lol

 

[tydaddy]

Lol. Have plenty of money. If I'm going to pay 80% of new, I'd rather just buy new so I can buy the pumps, fittings, and hoses I want. I figure the kettles/fermenter average $1500-2k each new. The controller can be built for under $2k.

I'm about to buy a spike trio 50 gal with double batch for under $5k shipped.

This is a super nice system...just overpriced imo.

 

[Hoosierbilly]

Ahh. Sounds like a plan. I thought about building the controller from their kit but ended up going with their pre-assembled one. Good luck with the build

 

[gorlox18]

GLWS

 

[Hoosierbilly]

Bump

 

[Hoosierbilly]

Bump