Vessels From 10 Gallon System Sparge Arm and CFC (Utah)
Upgraded to larger pots looking to sell off my old vessels. The HLT (shiny) is a 13 gallon keg cooker that I had fittings added to. The BK (unpolished) is a 15 gallon converted AB keg. The MT is a 72 quart (18 gallon) Coleman Xtreme cooler with SS braid. The set includes a copper sparge arm, and my all stainless DIY CFC.
Prices are as follows:
MT + Sparge Arm: $150:
Or if you buy the whole set $700
I will ship if buyer pays actual shipping costs.
The kegs have 4 1/2"NPT ports and the 1" nut for a heating element welded on, and a ground post. They also include pre-calibrated sight glasses on tees from Bobby. With the welded on nut you can make a heat stick and just screw it in hand tight with a silicone seal (I will include 2) and it seals perfectly. The discoloration around the nut on the HLT is from silver soldering a pinhole in the weld. There are no leaks these have served me well for many brews.
Reason: Parting out