BoilerMaker Dip tube = Crazy Dead Space - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > BoilerMaker Dip tube = Crazy Dead Space
Cool Brewing Corny 5G & Mini Giveaway
Sign-up To NEW HBT Article Newsletter - Brewing Articles Direct To You!

Reply
 
Thread Tools
Old 03-19-2013, 12:09 AM   #1
Ondori
Recipes 
 
Join Date: Mar 2012
Location: saint petersburg, FL
Posts: 197
Liked 15 Times on 13 Posts
Likes Given: 7


I got a boilermaker, and I was happy as hell, until I started to run off. I leave behind a gallon easy with this thing. I was having to siphon the rest out of the kettle. Pretty crazy. I was thinking this thing was going to suck the kettle dry, but I was wrong. Any one else have this issue? What did you do to fix it?



 
Reply With Quote
Old 03-19-2013, 12:17 AM   #2
weirdboy
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Join Date: May 2009
Location: Los Angeles
Posts: 8,079
Liked 469 Times on 378 Posts
Likes Given: 65


1. Tilt your kettle a bit towards the dip tube.

2. Especially if you are using a pump on it, as per the instructions that come with it, when you get down near the top of the dip tube, you ought to really slow down the flow rate until it's empty by closing the outlet valve on your pump most of the way (assuming March or LG magnetic drive). This allows the liquid level to settle a bit more evenly as it drains, so it doesn't lose siphon as quickly.



 
Reply With Quote
Old 03-19-2013, 12:22 AM   #3
mdgagne
Recipes 
 
Join Date: Jun 2011
Location: South China, Maine
Posts: 274
Liked 17 Times on 15 Posts


Never have trouble with mine, I usually siphon mine pretty much dry. You're using an appropriate amount of hose to keep a siphon when you're running off?
__________________
http://www.malthomebrewclub.org

 
Reply With Quote
Old 03-19-2013, 12:26 AM   #4
Ondori
Recipes 
 
Join Date: Mar 2012
Location: saint petersburg, FL
Posts: 197
Liked 15 Times on 13 Posts
Likes Given: 7


Hmm, maybe I will have to invest in a pump. Got any good pumps you recommend?

 
Reply With Quote
Old 03-19-2013, 12:27 AM   #5
Ondori
Recipes 
 
Join Date: Mar 2012
Location: saint petersburg, FL
Posts: 197
Liked 15 Times on 13 Posts
Likes Given: 7


Quote:
Originally Posted by mdgagne View Post
Never have trouble with mine, I usually siphon mine pretty much dry. You're using an appropriate amount of hose to keep a siphon when you're running off?
Possibly not. I will have to look into that.

 
Reply With Quote
Old 03-19-2013, 02:54 AM   #6
day_trippr
Recipes 
 
Join Date: May 2011
Location: Stow, MA
Posts: 16,168
Liked 2582 Times on 1957 Posts


All it takes is a couple of feet of siphon tubing below the ball valve to suck all but a cup or so out of a Boilermaker...

Cheers!

 
Reply With Quote
Old 03-19-2013, 04:50 PM   #7
mjohnson
Recipes 
 
Join Date: Mar 2010
Location: New Jersey
Posts: 580
Liked 34 Times on 30 Posts
Likes Given: 18


make sure your hose connections to the valve are very tight (maybe use a worm clamp to make sure if you aren't already). If there is any air getting in there, it can make it harder to maintain a good siphon.

 
Reply With Quote
Old 03-19-2013, 06:41 PM   #8
day_trippr
Recipes 
 
Join Date: May 2011
Location: Stow, MA
Posts: 16,168
Liked 2582 Times on 1957 Posts


Before I converted everything to camlocks, I just slipped a 3 foot piece of 1/2" ID silicone tubing over the barb, no need for a clamp...

Cheers!

 
Reply With Quote
Old 03-19-2013, 07:08 PM   #9
mjohnson
Recipes 
 
Join Date: Mar 2010
Location: New Jersey
Posts: 580
Liked 34 Times on 30 Posts
Likes Given: 18


Quote:
Originally Posted by day_trippr View Post
Before I converted everything to camlocks, I just slipped a 3 foot piece of 1/2" ID silicone tubing over the barb, no need for a clamp...

Cheers!
That's a lot of tubing over a small barb. Or maybe my barb isn't as big as yours?

OP: Just check that there isn't any air getting into the tubing at the kettle's valve. If there is, you can use a clamp, 3 foot of tubing (), or whatever you want to stop it.

 
Reply With Quote
Old 03-19-2013, 10:23 PM   #10
day_trippr
Recipes 
 
Join Date: May 2011
Location: Stow, MA
Posts: 16,168
Liked 2582 Times on 1957 Posts


Quote:
Originally Posted by mjohnson View Post
That's a lot of tubing over a small barb. Or maybe my barb isn't as big as yours?


All my vessels have 1/2" full-port ball valves, and I used 1/2" barbs on them before I switched to camlocks...

Cheers!



 
Reply With Quote
Reply

Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Boilermaker Dip Tube is Stuck senfo Equipment/Sanitation 2 01-26-2013 02:47 PM
Dip tube on Blichmann Boilermaker not working correctly? tlazaroff Equipment/Sanitation 2 04-29-2012 02:21 PM
Blichmann Boilermaker, broke my sight tube.. SDVmnt Equipment/Sanitation 2 11-21-2011 12:45 AM
Boil Kettle Dead Space & Mash Tun Dead Space jvcjbl Equipment/Sanitation 8 08-22-2011 12:35 PM
Boilermaker Pickup Tube Question? orencobrewer Equipment/Sanitation 3 05-04-2009 01:11 PM


Forum Jump