Just a few questions for new keezer project. - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Just a few questions for new keezer project.

Reply
 
Thread Tools
Old 06-13-2010, 08:37 PM   #1
sirquack
Recipes 
 
Apr 2010
Iowa
Posts: 31


Hello folks,

I will be starting my first keezer build soon using a kegconnection premium kit with upgrades, sunbeam 7.2 chest freezer from menards, and a thermostat control for chi company. Just have a few questions for now.

The Sunbeam has a temp control on the front, but I assume even at the highest setting, would still be to cold for a keezer application so I ordered the freezer conversion thermostat from CHI as it was the most affordable and had decent reviews on here.

When using the manual thermostat control from CHI, does it matter where I have the Sunbeam knob set at, seems I've read that people say to keep it at a lower setting? I plan to user around a 40deg setting on the CHI unit.

When hanging the temp bulb inside the freezer, would I want it about midway down, as I assume it will be colder at the bottom of the chest, and this might give me better results? Also, do people just hang them in mid-air, or is there other ways to do this properly?

thanks in advance, Randy

 
Reply With Quote
Old 06-13-2010, 10:27 PM   #2
bucfanmike
HBT_LIFETIMESUPPORTER.png
 
bucfanmike's Avatar
Recipes 
 
Apr 2010
Duluth
Posts: 1,023
Liked 27 Times on 24 Posts


when I read up on this for my build the suggestions were mostly to turn the freezer setting to its coldest position. I used the ebay aquarium controller for my build. I ran the temp probe about 2/3 of the way down and taped it to one of my cornies. This keeps the temp fluctuation down in my opinion.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
The 'Keezer' Project Jester369 Kegerators & Keezers 453 05-29-2015 12:37 AM
Keezer Project elmetal Kegerators & Keezers 3 12-20-2010 12:55 PM
Keezer Project Questions homebrewer_99 Kegerators & Keezers 5 12-18-2009 10:11 PM
Keezer Project v1.0 a W.I.P. TerryWendel Kegerators & Keezers 5 12-14-2008 09:23 PM
My keezer project Mustangfreak Kegerators & Keezers 12 12-14-2008 09:43 AM


Forum Jump