contagent93
Active Member
ok so i wanna do and automated brewery setup up for 20 gallon batches my initial idea was to mount a hot water heater element into an air compressor tank to make some steam right off the bat i was thinking injecting the steam straight into the mash and bk through a manifold but im wondering now if this is a good idea for the bk i know alot of people have done this for there mash but will it work just as well for the bk or should i try and do a jacketed system im planing on building this over the summer but need to keep cost relatively cheap ( respectively of course )
so now all i need is your thoughts should i go ahead and rig sum manifolds under some false bottoms
so now all i need is your thoughts should i go ahead and rig sum manifolds under some false bottoms