jlosbor
Member
I'm using 3/8 inch tubing, (if that makes any difference). Can't seem to get much flow above a 3 foot lift. I've shortened the tubing as much as possible but it appears that the most productive flow is 3 ft or less. Is this normal?
I had high hopes that I could pump hot water up to my HLT which is 6 ft above the pump. No way was that happening. Then I tried pumping to my mash tun, which is about four ft. Nothing doing.
It appears I have spent about $350.00 for pump, tubing, and quick disconnects to pump hot wort through my CF chiller. Whoopee.
I had high hopes that I could pump hot water up to my HLT which is 6 ft above the pump. No way was that happening. Then I tried pumping to my mash tun, which is about four ft. Nothing doing.
It appears I have spent about $350.00 for pump, tubing, and quick disconnects to pump hot wort through my CF chiller. Whoopee.