Anthony_Lopez
Well-Known Member
As some know from my last thread, I made my keggle last night...
The holes are drilled and they came out perfect (finally)
I built essentially the same jig that BobbyM uses with a slight difference.
Instead of using two clamps, I used 3" U brackets to hold the grinder in place... It worked great...
I ended up putting a clamp on there just to have something to hold the cord away from the grinder...
The finished product...
The holes are drilled and they came out perfect (finally)
I built essentially the same jig that BobbyM uses with a slight difference.
Instead of using two clamps, I used 3" U brackets to hold the grinder in place... It worked great...
I ended up putting a clamp on there just to have something to hold the cord away from the grinder...
The finished product...