I can't find anything online for less than $25 for a simple needle valve for flame control. Any ideas? Even Mcmaster is expensive as all hell for these. Home Depot, Lowes and Ace all had nothing in this size.
Thanks.
Thanks.
Where to buy 1/2" NPT needle valves?
- Thread starter ghart999
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
These guys have a 1/4" brass needle valve for $14.00, but with shipping it's probably going to be about $22:
http://www.flameengineering.com/Valves.html
IMO, you don't really need a 1/2" valve. Remember, the gas is going to be squeezing through a tiny orifice as it enters the burner and it's a lot smaller than 1/4".
FYI, I would just use a 1/4" ball valve from Home Depot. I use a ball valve on my low pressure burner and it works just fine.
http://www.flameengineering.com/Valves.html
IMO, you don't really need a 1/2" valve. Remember, the gas is going to be squeezing through a tiny orifice as it enters the burner and it's a lot smaller than 1/4".
FYI, I would just use a 1/4" ball valve from Home Depot. I use a ball valve on my low pressure burner and it works just fine.
Sawdustguy
Well-Known Member
You didn't look very hard. There are four of them that are less than $25 with shipping as buy it now items on Ebay.
Swagelok has them, I just checked. Way above your price point though I imagine.
I actually found one here http://bayouclassicdepot.com/nv108p_propane_burner_part.htm.htm
for $8.
for $8.
He wants 1/2 NPT
Similar threads
California
SOLD Spike CF10 unitank extras 750
Latest posts
-
Trying to come up with a recipe to showcase a unique ingredient (Murphy and Rude Crystal 260)- Latest: whatstyleguidelines
-
-
-
-
-
-
