B-Dub
Well-Known Member
I am hoping to bottle some 30 gallons of a 60 gallon barrel and store the other 30 gallons. Should lady luck, aka my wife, be on my side this could happen this week.
The barrel will then be stored until next week when I plan to brew into it. Not my first choice, but the most family friendly.
Only looking to inhibit mold growth my plan is to rinse the barrel with hot water via an outside hose, let it drip dry for half a day and burn a sulfur wick.
The following week 30 gallons of beer goes in the barrel for fermentation. Followed by topping of the previously held back 30 gallons from the original brew when the foam settles a bit.
Any other ideas that meet the goal of holding back the mold for a week or so?
Happy brewing,
BW
If you are reading this you are not at the 2011 NHC. Me either, maybe next year.
The barrel will then be stored until next week when I plan to brew into it. Not my first choice, but the most family friendly.
Only looking to inhibit mold growth my plan is to rinse the barrel with hot water via an outside hose, let it drip dry for half a day and burn a sulfur wick.
The following week 30 gallons of beer goes in the barrel for fermentation. Followed by topping of the previously held back 30 gallons from the original brew when the foam settles a bit.
Any other ideas that meet the goal of holding back the mold for a week or so?
Happy brewing,
BW
If you are reading this you are not at the 2011 NHC. Me either, maybe next year.