flyangler18
Well-Known Member
So, I've got a March pump en route and my bulkhead ball-valves sitting in the basement waiting for me to drill the kettles tonight and get everything fitted. McMaster's website makes my head spin with all the options; I'm going to fit brass QDs on both the input and output sides of the March pump but I can't seem to identify easily what parts I need.
So here's what I'm after:
1/2 inch QD set x 3 for my BK, MLT and HLT. 1/2 threaded for the plug side, 1/2 barb on the QD side to fit into the 1/2 inch silicon tubing for transfers.
The appropriate fittings for the March pump side. I'm guessing I need a female-female coupling so the 1/2 inch QD sets connect.
Help please!
So here's what I'm after:
1/2 inch QD set x 3 for my BK, MLT and HLT. 1/2 threaded for the plug side, 1/2 barb on the QD side to fit into the 1/2 inch silicon tubing for transfers.
The appropriate fittings for the March pump side. I'm guessing I need a female-female coupling so the 1/2 inch QD sets connect.
Help please!