I'm hoping to start building a single tier brew stand in the not too distant future. Right now I'm in the planning stage, designing the stand and various options. I'm going to start fairly simple and add on as time / money allows. The first phase will be the stand with three burners that will be manually lit / controlled. In the future I plan to automate the HLT and MLT burners with temp controllers.
Here's a rendering of the basic frame plan. Its based on the Brutus design with a few tweaks. I'm putting the gas manifold on the front so I'll have easy access to the burner valves. I'm still working out the details on the burner heat shield and the best way to ensure the burner exhaust is vented.
Any input would be appreciated. I've learned a ton here reading about everyone's builds so I thought I'd throw mine up there and hopefully someone else can learn from mine as I'm going through the process.
Here's a rendering of the basic frame plan. Its based on the Brutus design with a few tweaks. I'm putting the gas manifold on the front so I'll have easy access to the burner valves. I'm still working out the details on the burner heat shield and the best way to ensure the burner exhaust is vented.
Any input would be appreciated. I've learned a ton here reading about everyone's builds so I thought I'd throw mine up there and hopefully someone else can learn from mine as I'm going through the process.