15" hinged False Bottoms with 5/8"hole in the Clearance section

Hay guys built a bunch of these for one of our wholesale vendors and we had a few leftovers. We don't normally offer a 5/8" hole and I really didn't want to see these sit around. We took some $$$ off the normal price.

http://www.norcalbrewingsolutions.com/store/Clearance.html


Cheers
Jay

Received a few pm's so I thought I would clarify in public. Yes there are a limited number. Once "THESE" are gone this price will be too. Yes I can always drill a 5/8" hole and do all the time for people so its not like we wont be able to get you the False Bottom you want later. It will just cost more .

These are going fairly fast.

Cheers
Jay

Jaybird, I was actually about to purchase your 15" fb with level 3 filter and dip tube/ ball valve, Do you offer a dip tube to accommodate the 5/8 hole?

JayMckeever said:

Jaybird, I was actually about to purchase your 15" fb with level 3 filter and dip tube/ ball valve, Do you offer a dip tube to accommodate the 5/8 hole?

Click to expand...

We don't. To be honest a small silicone o ring fills the hole perfectly when using a 1/2" dip tube And if you are using a level 3 the hole on the level 3 will close the gap and be tight around the dip tube...

Cheers
Jay

That works for me. Thanks for the quick reply. Order is going in now!

JayMckeever said:

That works for me. Thanks for the quick reply. Order is going in now!

Click to expand...

Thanks Jay! I will see if I can find another silicone gasket. If I can I'll just toss one in the box for ya.

Cheers
Jay

My shipping manager has already been emailed by me to be on the lookout for another gasket. I am sure we can send something along. Thanks for the order! It will go out tomorrow.

Cheers
Jay

Package came today. Must say it really looks solid. I can't wait till next brew day to get this thing rocking! Thanks again!

Jay - I just got a keggle and am making it into a mash tun. I'm looking at the 15" hinged FB - does this FB just sit flat at the bottom of the keg? Does it HAVE to have a stand? I'm a bit puzzled about what the FB sits on.

cwb445 said:

Jay - I just got a keggle and am making it into a mash tun. I'm looking at the 15" hinged FB - does this FB just sit flat at the bottom of the keg? Does it HAVE to have a stand? I'm a bit puzzled about what the FB sits on.

Click to expand...

It does sit flat. I do suggest a level 1 for a MLT. And I do believe we have 1 of these left but I will have to check with Evan first.

The False Bottom sits on
http://www.norcalbrewingsolutions.com/store/Level-1_15-Inch_FB_Stand.html

Cheers
Jay