cyborgmexican
Active Member
Hey everybody! I just built this puppy this morning. The fridge was a wine and beverage chiller with a thermostat built in. I origionally used it for Mr.Beer but its way too small for a 5 gallon bucket or carboy. I got the foam @ HomeDepot for 16 bucks. Regular clear tape was used to join the outer surfaces and Duct tape was used to seal the inner joints. This build took me less that 2 hours. Right now theres a sticky thermometer and submerged thermometer in there so I can get the temp right on the dial.
The door must be removed...
Sizing...
I added a bead around the lid to reduce leakage seeing there is no seal. I'm considering doing something similar around all the other joints but ill wait to see how well it maintains temp.
Guess I need to get a membership.
The door must be removed...
Sizing...
I added a bead around the lid to reduce leakage seeing there is no seal. I'm considering doing something similar around all the other joints but ill wait to see how well it maintains temp.
Guess I need to get a membership.