cheez
Well-Known Member
I just placed an order with Stout Tanks for a 1/2 barrel setup and I'm in the process of gathering all of the parts and pieces for a 50-amp PID back-to-back brewing system. I'll probably order a modified kit from ebrewsupply, get the Aubers PID's, timers, and deluxe RTD probes, and get a 16x16x8 steel enclosure from wherever.
I'm thinking two timers will be handy for back-to-back batches. I would like to have a separate alarm light for each PID and timer but have them all hooked up to one buzzer (if possible). That way I could tell which item is triggering the alarm. I think this would also be helpful for back-to-back batches as I may have an alarm going off for a timer at the same time an alarm is going off for reaching HLT temp (or whatever combo it may be).
Any input on this control panel layout is greatly appreciated!
View attachment control panel.pdf
I'm thinking two timers will be handy for back-to-back batches. I would like to have a separate alarm light for each PID and timer but have them all hooked up to one buzzer (if possible). That way I could tell which item is triggering the alarm. I think this would also be helpful for back-to-back batches as I may have an alarm going off for a timer at the same time an alarm is going off for reaching HLT temp (or whatever combo it may be).
Any input on this control panel layout is greatly appreciated!
View attachment control panel.pdf