Help with Love wiring

wps-hbt
Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Displaced MassHole

Displaced MassHole

Well-Known Member
Joined
May 12, 2008
Messages
1,120
Reaction score
10
Location
San Diego
I've got two of the newer Lover controllers to use in my brutus clone, but I'm not sure how exactly to wire them. The instructions they come with are rather vauge, and I'm not sure if I have found the proper directions anywhere on HBT. Could someone provide some insight or a link to the proper schematics, all the ones I've found are for keezer/kegerator setups.
 
Is that going to be the same for heat controll? I kinda thought that was how it should be and you just adjust the settings on the controller to reflect heat control. Am I wrong?
 
You are correct. The schematics in that thread are the same for heating and cooling applications. The modes you select in the LOVE controller will determine what is done with the collected data (i.e., temperature readings).
 

Similar threads

Nagorg
Weight of Beer Kegs in Keezer
Replies
6
Views
464
day_trippr
day_trippr
David Coy
Power 1 and/or 2 Anvil Foundries at 240 from a 30 amp 240 spa panel
Replies
4
Views
626
David Coy
David Coy
spotted_dog
Kegerator, Keezer, or Other?
Replies
31
Views
2K
day_trippr
day_trippr
I
SS Brewtech InfuSSion Mash Tun Custom Heater
Replies
7
Views
1K
Indian_villager
I
jdubdvdt
Bulk Pasteurization Research Thread
Replies
10
Views
592
CKuhns
CKuhns
SSBrew 300

Latest posts

Back
Top