Kegerator Question

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

PenPen

Well-Known Member
Joined
Mar 4, 2007
Messages
68
Reaction score
0
Location
Bellefontaine, Ohio
(Fixed the pictures finally! Such a rookie...:confused: )

Anyway,
Here's the new kegerator
Fridge1
Fridge2

I can fit two cornies and the co2 tank on the bottom of the fridge (stupid compressor hump).

I can fit add'l carboys/cornies in the top of the fridge, but the shelf won't support the weight. I need to either rig a support the shelf or craft some rack in its place.

Anybody built a shelf like this? Any advice



Thanks!
 
Actually, just putting some 2x2's to support the corners of the existing shelf would do it.
 
david_42 said:
Actually, just putting some 2x2's to support the corners of the existing shelf would do it.

I was about to say!!!

You may want to put some weight on there and see if the rear bracket can support the weight as well. More than likely it can and all you will need to do is get some wood out front.
 

Latest posts

Back
Top