Greetings!
I have the below unit.
http://www.compactappliance.com/Magic-Chef-50-Bottle-Digital-Wine-Cooler-MCWC50DBTC/MCWC50DBTC,default,pd.html?mtcpromotion=PLA%3EWine_and_Beverage%3EWine_Coolers%3E40_75_Bottle_Wine_Refrigerators%3EMCWC50DBTC&gclid=CO2S093V2bYCFTSVMgodbzQAGw
I've seen this unit used with the Cask Widge system to dispense cask ale with a beer engine. The people I talked to said it worked wonderful for them.
However, I haven't been able to find out exactly where to drill my hole to feed the supply line to the beer engine exactly at.
After some research thru the forums, I came across this thread: https://www.homebrewtalk.com/f35/ha...e-depot-magic-chef-5-8-cu-ft-kegerator-76948/
where they have done essentially the same thing, with a different Magic Chef fridge, but I'm guessing the wire schematics would be very similar, if not the same in the two units.
Has anyone converted the above cooler to do what I speak of? Any input at all, measurements, etc would be greatly appreciated. Thanks for reading!
I have the below unit.
http://www.compactappliance.com/Magic-Chef-50-Bottle-Digital-Wine-Cooler-MCWC50DBTC/MCWC50DBTC,default,pd.html?mtcpromotion=PLA%3EWine_and_Beverage%3EWine_Coolers%3E40_75_Bottle_Wine_Refrigerators%3EMCWC50DBTC&gclid=CO2S093V2bYCFTSVMgodbzQAGw
I've seen this unit used with the Cask Widge system to dispense cask ale with a beer engine. The people I talked to said it worked wonderful for them.
However, I haven't been able to find out exactly where to drill my hole to feed the supply line to the beer engine exactly at.
After some research thru the forums, I came across this thread: https://www.homebrewtalk.com/f35/ha...e-depot-magic-chef-5-8-cu-ft-kegerator-76948/
where they have done essentially the same thing, with a different Magic Chef fridge, but I'm guessing the wire schematics would be very similar, if not the same in the two units.
Has anyone converted the above cooler to do what I speak of? Any input at all, measurements, etc would be greatly appreciated. Thanks for reading!
