mine is all 3 wire. All the way to the breaker. How is it that I'm getting 240v to the other outlets (like the dryer) on a similar 2 pole breaker? Could it be the breaker is different?
Wait.... A three prong wall socket? Is this a 3 prong 240V AC dryer socket, or a standard 115V wall socket? 240V is two 115 (110, 120, what ever) that are from opposite legs in the distribution panel. I never checked the phasing of household wiring with the O-Scope so I don't know if they are 180 deg or 120 deg out of phase, but that is not really required information. What is required is a picture of the socket you are feeding from, and if you installed it, how is it wired up?
If you remove the breaker above your feed breaker, move the two pole feed up one space and reinstall the one you removed on the bottom, I think you'll have it.
If you remove the breaker above your feed breaker, move the two pole feed up one space and reinstall the one you removed on the bottom, I think you'll have it.
It works! Now I just need to figure out why the temp probe isn't reading correctly
Enter your email address to join: