hi everyone, well i just brewing my own beer and for my first kit i used the Orange Brewery SW1 Pale Ale kit. It was setup by my local brew shop and had everything i need. The primary fermentation went by with no problems and was bubbling heavily after the first 24 hours, then slowed by day 4-5. I swapped it over to the secondary at 7 days and it was not bubbling at all. It has been in the carboy for 10 days and i have not seen one bubble out of the airlock, although there is pressure enough to make cap float. There has been some small bubbles and foaming at the top of the beer, and can see some very small bubbles rising. Is this a problem? I have read through homebrewing for dummies and the complete joy of homebrewing but i couldn't find any answers. I started my second batch this time newcastle. It has basically done the same but it has only been in the secondary for 3 days.