2 Diff Beers, 1 CO2 Tank

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Slinggalin

Active Member
Joined
Mar 19, 2008
Messages
41
Reaction score
0
Location
Moreno Valley CA
I've been trying to search the forum, but cannot seem to find this answer.

Can you have 2-3 different beers all carbing at the same time at the same PSI level, 12 for 2 weeks slow carbonating???? :cross:

The Beers:
- Lite
- Hefe
- Porter

Thanks :rockin:
 
You want them all at the same level? Yes, no problem. You want them at different levels from one tank, that too is possible. There are many ways of going about it. What is your setup like right now?
 
Get a stainless cross from Austin Homebrew like this.

cross.jpg

Austin Homebrew Supply

Add some 1/4" air line hose and clamps and you are good to go.

This is how I push three beers through my kegerator.

Kegerator1.jpg


I used to carb the same way before I got a chest freezer. I carb and push beer at 12 psi and it works fine this way. No need for an expensive manifold.
 
You want them all at the same level? Yes, no problem. You want them at different levels from one tank, that too is possible. There are many ways of going about it. What is your setup like right now?

Hey Z,

Thanks fer your reply. 2 bad I cannot add a pic to this but let me try and explain.

- I have a 3 spout tower atop of a freezer w/ temp control
- 1 CO2 tank w/ a brass manifold and 3 lines
- 3 cornie kegs
 
Back
Top