gruversm
Well-Known Member
Looking to build a 4" (base) single pedastal T-Tower with 5 taps out of Stainless Steel. Does anyone know of a source where I could get a technical drawing?
Looking for Technical Drawing..
- Thread starter gruversm
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
Dr_Deathweed
Well-Known Member
If you know what you want, you might be able to do it yourself with Google Sketchup.
MoRoToRiUm
Well-Known Member
- Joined
- Jun 17, 2008
- Messages
- 1,389
- Reaction score
- 6
This is a QUICK mock up to give you an idea; I have tabs in gray, some of them are doubled so you can bend them and have a nice finished edge, the others so you have spots to attach.
I've seen something like this done before with PVC tubing and plastic fencing...
I've seen something like this done before with PVC tubing and plastic fencing...
OP
OP
gruversm
Well-Known Member
Wow! Thanks, so much.
MoRoToRiUm
Well-Known Member
- Joined
- Jun 17, 2008
- Messages
- 1,389
- Reaction score
- 6
Just remember, measure twice, cut once (and hope you have a press or pneumatic- I can't imagine getting really straight with snips). Let us know how it turns out!
jimjart
Active Member
to those who helped in giving direction, our beer tower is now through
production and mounted onto the counter top.
It awaites beer lines and taps. We will post pics soon
production and mounted onto the counter top.
It awaites beer lines and taps. We will post pics soon
MoRoToRiUm
Well-Known Member
- Joined
- Jun 17, 2008
- Messages
- 1,389
- Reaction score
- 6
to those who helped in giving direction, our beer tower is now through
production and mounted onto the counter top.
It awaites beer lines and taps. We will post pics soon
I'm excited to see it; feel free to post this on thefollowing thread as well!
https://www.homebrewtalk.com/f35/show-us-your-kegerator-29053/
OP
OP
gruversm
Well-Known Member
Our tower just got fabricated as well! I would like to thank everyone who helped my find schematics.
lapaglia
Well-Known Member
whats the on-center spacing on the holes for the taps?
MoRoToRiUm
Well-Known Member
- Joined
- Jun 17, 2008
- Messages
- 1,389
- Reaction score
- 6
So much beer, so little time...
OP
OP
gruversm
Well-Known Member
Go to MicroMatic.com - Draft Keg Beer Equipment, Kegerator, Taps and visit their 'taps' section. They have a fairly detailed schematic in PDF form that you can download and print with measurements.
Good luck!
