Burner Question

i am in the planning stages of building my new brew sculpture. i am currently considering which burners to use. i am looking at the multi-jet gas burner. this product is for propane only, which is fine with me. but it is high pressure. amazon has a 0-30psi regulator they recommend to buy with the burner. my question is does this regulator hook directly to my 20lb propane cylinder? and can i run 2 burners with one regulator? thanks in advance for all your input.

Here is a link for your items: http://www.amazon.com/dp/B0000E2VRT/?tag=skimlinks_replacement-20

You will need to either build a propane manifold to run several at once or just connect one directly to a propane tank via hose to tank etc...


I use the banjo BG-14 burners which connect to the propane gas manifold I built and then to the 30 psi regulator which is connected to the propane tank. I can run up to 3 burners all at once.

here is the link for the burner i was talking about.

http://www.amazon.com/gp/product/B0000E2VRT/?tag=skimlinks_replacement-20

thenatibrewer said:

here is the link for the burner i was talking about.

http://www.amazon.com/gp/product/B0000E2VRT/?tag=skimlinks_replacement-20

Click to expand...

HEHE... beat you too it!

so, can i use 1 high pressure regulator and two of those burners on my propane cylinder?

Nati,
You will not find a consensus about burners. Here is one of my posts, with links to other info. There is a lot of info, but worth the read. The regulator that I bought will run my 2 burners wide open. However as mentioned before, you will need a manifold to throttle the flow to the burners. Even though they are the “same”, one will get more gas than the other.
Check these two links, read my comments. There are prices & info.
https://www.homebrewtalk.com/f11/hurricane-burner-106183/
https://www.homebrewtalk.com/f11/10-banjo-burner-111177/

Luck - Dwain
P.S. here's where I bought them: http://www.gasngrills.com/

thanks for the info. Dwain