would you reuse this hose?

I just bought two 7 pass coldplates with wunder guns attached. I am going to use one of the cold plate to build a jockeybox. My first instinct was to throw out all the hoses i cut away. 5 of the 7 lines had some type of soda/pop running through them. 2 of the lines were set up on the guns were just water, so they shouldn't have issues of flavor leeching into the beer. Now this is 1/4 instead of 3/16, but I am of the understanding that I will be running a bit higher pressure to push through the cold plate anyway. Would you reuse the hoses that were water only or toss them and start with new?


Thanks,
Mike

Why yes I would reuse the hose Mike.

or how about you just give me the whole wonder bar setup and i will give you some hose

No reason not to reuse the hose. I second Doctorsbro, though. I'D be happy to take it off your hands and give you regular beer line!

Thanks for the answers guys, I was hoping that others agreed with me. It seemed a waste to throw it out.

Ok, I'll play the other side of this one. Hose is cheap. Why take a chance? I would replace it.

jonp9576 said:

Ok, I'll play the other side of this one. Hose is cheap. Why take a chance? I would replace it.

Click to expand...

Exactly what I was thinking. Hose is cheap, no sense in using it and finding out its the source of an off flavor.