I had kinda posted some of this in another thread, but don't want to hijack someones thread. I am soon to be getting my Brewstand from Marcus to put together a single tier propane system. I am looking into my options on temperature readings on the different keggles. Some have pointed out how disappointed they are with their bimetal dial thermometers. I like the digital readouts of the automated controllers, but really do not have intention of going automated anytime soon. I was looking at ways to use a thermocouple, but am getting real confused real quick.
What if I got a couple of these:
http://cgi.ebay.com/Digital-Temperature-Meter-K-TypeThermocouple-F-110-/250484743955?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item3a520ddf13
Could I use these probes with their compression fitting?
http://www.brewershardware.com/10-Temperature-Sensor-LOVE-TS.html
Any advice or input would be greatly appreciated.
What if I got a couple of these:
http://cgi.ebay.com/Digital-Temperature-Meter-K-TypeThermocouple-F-110-/250484743955?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item3a520ddf13
Could I use these probes with their compression fitting?
http://www.brewershardware.com/10-Temperature-Sensor-LOVE-TS.html
Any advice or input would be greatly appreciated.
