Crimsonwine
Well-Known Member
I have a couple of these eBay temp controllers and I am looking to upgrade the temp probes to something longer....
I am looking at the ones at brewers hardware...I've been chatting with them...but they can not confirm they will work...
The temp probe that comes with the eBay temp controller is an 10K/3435
1) Rated zero-power resistance: R25: 10KΩ ± 5% ( at 25℃ )
2) B value: B25/85: 3,435K ± 1%
* The B value is calculated using the zero-power resistance values measured at 25℃ and 85℃.
The BH one for the BCS is NTC 10K/3877
1) Rated zero-power resistance: R25: 10KΩ ± 2% ( at 25℃ )
2) B value: B25/85: 3,877K ± .75%
Anyone with more knowledge than I have could help me out and let me know if the BH one can work....I do know the eBay controller is adjustable...
These are going on a Brutus 10 Build...
I am looking at the ones at brewers hardware...I've been chatting with them...but they can not confirm they will work...
The temp probe that comes with the eBay temp controller is an 10K/3435
1) Rated zero-power resistance: R25: 10KΩ ± 5% ( at 25℃ )
2) B value: B25/85: 3,435K ± 1%
* The B value is calculated using the zero-power resistance values measured at 25℃ and 85℃.
The BH one for the BCS is NTC 10K/3877
1) Rated zero-power resistance: R25: 10KΩ ± 2% ( at 25℃ )
2) B value: B25/85: 3,877K ± .75%
Anyone with more knowledge than I have could help me out and let me know if the BH one can work....I do know the eBay controller is adjustable...
These are going on a Brutus 10 Build...