Dead guy ale help

http://www.homebrewers.com/product/10449/Rogue_Dead_Guy_Ale_Beer_Kit.html
That is the kit i bought. Since i have bought it i have moved to a new town. In transit i have lost the instructions. I think i know how to brew it but im hopeing for some help.

1. Sanatize it all
2. Bring 5 gallons of water to 155deg
3. Seep grains for 20 min
4. Add Malt powder
5. Bring to a boil while stirring for 60min
6. Add Favor hops. bolil for 20min
7. Add bittering hops
8. Cool to 70deg
9. Add to carboy then pitch yeast
10. wait for 3 weeks then bottle.

If all is correct then when do i add the candi suguar included?
Am i even close?

1. Sanitize everything
2. Steep grains at 160ish for 20-30 minutes in a couple gallons of water
3. Top up to 5.5-6 gallons of water, (if you have room because some will boil off, if not you can do a partial boil), and bring to boil.
4. Remove from heat and stir in malt extract (powder), stir till fully dissolved.
5. Bring back to boil, add bittering hops, and start timer for the 60 minute boil.
6. With 20 minutes left in the 60min boil, add flavor hops and candi sugar.
7. After 60 minutes, turn off heat and cool to 70 deg.
8. Add to carboy, shake the crap out of it for a few minute to aerate (the ONLY time you want aerate), and pitch yeast.
9. If only doing single stage, wait 2-3 weeks, add priming sugar and bottle.

www.howtobrew.com <------ everything you need to know.