building kegerator

Yakima 728
Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
T

tigerdentist

Active Member
Joined
Jan 2, 2009
Messages
37
Reaction score
0
do i need a hole saw, or can i just use drill bits made for metal? I have bits, not spade bits, up to 1" in diameter. ( cutting through fullsize fridge for perlick faucets.) Wood backing a necessity as well?
 
If you have bits large enough for your shanks then go for it. I wouldn't use a spade bit unless you want to break the bit or your wrist.

As far as a wood backer you may or may not need to use one, it depends on the inside of the fridge.

-cheers
 

Similar threads

Yesfan
Komos/Kegland Kegerator Tower Question
Replies
1
Views
307
Broken Crow
Broken Crow
Gunshowgreg
PERLICK 630SS with Duotight connection
Replies
25
Views
843
beren
beren
Classywolf
Inwall tap system
Replies
2
Views
312
day_trippr
day_trippr
P
Kegerator leaking from inside the tower
Replies
11
Views
741
sibelman
sibelman
U
Gas line hole location in a Magic Chef 10.1 cu. Ft. Refrigerator
Replies
11
Views
1K
uptheirons
U
Yakima 300

Latest posts

Back
Top