jageraholic
Well-Known Member
So I wanted to do a clone of the founders breakfast stout and found a recipe on BYO.com I had a few questions on it though with the smaller ingredients, for instance would i put the flaked oak in a hop sack? Also, if I put the ground coffee right in the fermentation bucket, would i need to strain my beer before bottling in order to not have the grinds in the beer? And it asks for dark bittersweet bakers chocolate, just wondering what size of pieces that needs to be in?
Any other recommendations?
Thanks
Here's the recipe from their site:
6.6 lbs. (3.0 kg) Briess light, unhopped, malt extract
1.7 lbs. (0.77 kg) light dry extract
22 oz. (0.62 kg) flaked oats
1.0 lb. (0.45 kg) chocolate malt (350 °L)
12 oz. (0.34 kg) roast barley malt (450 °L)
9.0 oz. (0.25 kg) debittered, black malt (530 °L)
7.0 oz. (0.19 kg) crystal malt (120 °L)
2.0 oz. (57 g) ground Sumatran coffee
2.0 oz. (57 g) ground Kona coffee
2.5 oz. (71 g) dark, bittersweet bakers chocolate
1.5 oz. (43 g) unsweetened chocolate baking nibs
14.3 AAU Nugget pellet hops (60 min.) (1.1 oz./ 31 g of 13% alpha acid)
2.5 AAU Willamette pellet hops (30 min.) (0.5 oz./ 14 g of 5 % alpha acid)
2.5 AAU Willamette pellet hops (0 min.) (0.5 oz./ 14 g of 5 % alpha acid)
1⁄2 tsp. yeast nutrient (last 15 minutes)
1⁄2 tsp. Irish moss (last 15 minutes
White Labs WLP 001 (American Ale) or Wyeast 1056 (American Ale) yeast
0.75 cup (150 g) of corn sugar for priming (if bottling)
Step by Step:
Steep the crushed grain in 2 gallons (7.6 L) of water at 155 ºF (68 ºC) for 30 minutes. Remove grains from the wort and rinse with 2 quarts (1.8 L) of hot water. Add the liquid and dried malt extracts and bring to a boil. Add the hops and Irish moss as per the schedule. Add the Sumatran coffee and two chocolate varieties at the end of the boil. Add the wort to 2 gallons (7.6 L) of cold water in a sanitized fermenter and top off with cold water up to 5 gallons (19 L). Cool the wort to 75 ºF (24 ºC). Pitch the yeast and aerate the wort heavily. Allow the beer to cool to 68 ºF (20 ºC). Hold at that temperature until fermentation is complete. Transfer to a carboy, avoiding any splashing. Add the Kona coffee and condition for one week, then bottle or keg. Carbonate and age for two weeks.
Any other recommendations?
Thanks
Here's the recipe from their site:
6.6 lbs. (3.0 kg) Briess light, unhopped, malt extract
1.7 lbs. (0.77 kg) light dry extract
22 oz. (0.62 kg) flaked oats
1.0 lb. (0.45 kg) chocolate malt (350 °L)
12 oz. (0.34 kg) roast barley malt (450 °L)
9.0 oz. (0.25 kg) debittered, black malt (530 °L)
7.0 oz. (0.19 kg) crystal malt (120 °L)
2.0 oz. (57 g) ground Sumatran coffee
2.0 oz. (57 g) ground Kona coffee
2.5 oz. (71 g) dark, bittersweet bakers chocolate
1.5 oz. (43 g) unsweetened chocolate baking nibs
14.3 AAU Nugget pellet hops (60 min.) (1.1 oz./ 31 g of 13% alpha acid)
2.5 AAU Willamette pellet hops (30 min.) (0.5 oz./ 14 g of 5 % alpha acid)
2.5 AAU Willamette pellet hops (0 min.) (0.5 oz./ 14 g of 5 % alpha acid)
1⁄2 tsp. yeast nutrient (last 15 minutes)
1⁄2 tsp. Irish moss (last 15 minutes
White Labs WLP 001 (American Ale) or Wyeast 1056 (American Ale) yeast
0.75 cup (150 g) of corn sugar for priming (if bottling)
Step by Step:
Steep the crushed grain in 2 gallons (7.6 L) of water at 155 ºF (68 ºC) for 30 minutes. Remove grains from the wort and rinse with 2 quarts (1.8 L) of hot water. Add the liquid and dried malt extracts and bring to a boil. Add the hops and Irish moss as per the schedule. Add the Sumatran coffee and two chocolate varieties at the end of the boil. Add the wort to 2 gallons (7.6 L) of cold water in a sanitized fermenter and top off with cold water up to 5 gallons (19 L). Cool the wort to 75 ºF (24 ºC). Pitch the yeast and aerate the wort heavily. Allow the beer to cool to 68 ºF (20 ºC). Hold at that temperature until fermentation is complete. Transfer to a carboy, avoiding any splashing. Add the Kona coffee and condition for one week, then bottle or keg. Carbonate and age for two weeks.