BlackTieBrewing
Well-Known Member
So I'm working on my Brutus build and it's coming along nicely, the control panel is wired and Love controllers are configured. I want to add a float switch so I can have an auto sparge mode. I'm planning to run low voltage DC current through the float and to an SSR. I've already bought the SSR, a stainless float switch and a SPDT center off toggle switch. The only thing I'm not sure about is how to wire everything to my SPDT switch so that in ON mode the pump is on, in OFF it is off, and in AUTO it only comes on when activated by the float switch. If someone could explain how to wire it up or has a good diagram that would be great. This is the only useful one I've found so far but doesn't have all the info I need.
Found it here: http://www.thebrewingnetwork.com/forum/viewtopic.php?f=3&t=9649
And here's some pics of my Brutus coming along, still a work in progress but should be operational in 2-3 weeks once I get the rest of my parts.
Found it here: http://www.thebrewingnetwork.com/forum/viewtopic.php?f=3&t=9649
And here's some pics of my Brutus coming along, still a work in progress but should be operational in 2-3 weeks once I get the rest of my parts.