California is in a drought. Don't have enough time. Not brewing enough. Need money for other hobbies. All of these reasons came up when discussing with the SWMBO that I wanted to sell my wonderful 20 gallon setup.
I will be selling this as a kit. I will not part out until I have at least sold the fermenter and stout tanks. You will not find a sale like this anywhere else.
Don't see some other things you would like? I probably have it if it would make sense with this setup. Feel free to pm with any questions.
I am located in Orange County, but will drive a considerable distance if it makes the deal happen and I get to visit some cool places along the way.
High level setup:
20 gallon Brewers Hardware jacketed conical fermenter - SOLD
20 gallon Stout HLT - SOLD
20 Gallon Stout MLT - SOLD
20 Gallon Stout BK - SOLD
4 Tap Keezer with SS perlicks - On Hold
4 way regulator - $150
5lb Aluminum CO2 tank -$40
2 Ball lock kegs - $130
Monster Mill MM2 with hopper and 1 hp motor.belt/pulleys - $350
Duda Diesel Plate Chiller - 120 Shipped
2 Stainless chugger pumps - SOLD
Stout oxygen system with tank and regulator - SOLD
BCS-462 - SOLD
Wifi adapter - SOLD
Control Panel - Need to break down, will list parts separately soon
GFCI circuit breaker - $30
DIY Glycol chiller (BCS controlled) - SOLD
DIY Stir plate - $30
5 Liter starter flask
2 Liter Starter flask
2 Still Dragon 2" Tri Clover adapters with 2 5500 watt heating elements and cable - $100
4 BCS Temp probes - SOLD
CIP system for corny and conical - SOLD
2 Vittles vault for grain storage - $20 each
2 Carboys - $15 each
Bench top capper - $30
hannah ph meter - $50
refractometer - $40
+ Everything needed to use all of this equipment (Tri clovers, butterfly valves, ball valves)
Overall system
Conical with psi gauge, ball lock adapter, butterfly valves, yeast harvester
HLT with two 2" ports (1 for element, 1 for included temp probe)
[imghttps://farm1.staticflickr.com/593/21841861740_48dbb058c4_z.jpg[/img]
MLT with bottom drain and false bottom
BK with whirlpool and two 2" ports
Monster Mill setup (Kennedy not included)
Control Panel
Hop Spider
Oxygen Setup
Chugger
Still dragon adapters with 5500 Watt elements
Keezer with stainless perlicks
$6500 takes every piece of brewing equipment out of my garage and into yours. It includes everything you need to brew. Even have a couple pounds of hops in the freezer. If you have a question about something I didn't list, just ask. I didn't list all of the tubing, tri clover connections, ball lock connectors etc., but its all here.
I put my heart and soul into researching and developing (I'm an R&D engineer by trade) this system, and I am sure the next owner will love it.
Hell, we can even brew the first batch together if you want me to walk you through it.
If I can't sell it all to one buyer, I will take offers on groups of items as long as it includes either the conical or the 3 stout pots.
I will be selling this as a kit. I will not part out until I have at least sold the fermenter and stout tanks. You will not find a sale like this anywhere else.
Don't see some other things you would like? I probably have it if it would make sense with this setup. Feel free to pm with any questions.
I am located in Orange County, but will drive a considerable distance if it makes the deal happen and I get to visit some cool places along the way.
High level setup:
20 gallon Brewers Hardware jacketed conical fermenter - SOLD
20 gallon Stout HLT - SOLD
20 Gallon Stout MLT - SOLD
20 Gallon Stout BK - SOLD
4 Tap Keezer with SS perlicks - On Hold
4 way regulator - $150
5lb Aluminum CO2 tank -$40
2 Ball lock kegs - $130
Monster Mill MM2 with hopper and 1 hp motor.belt/pulleys - $350
Duda Diesel Plate Chiller - 120 Shipped
2 Stainless chugger pumps - SOLD
Stout oxygen system with tank and regulator - SOLD
BCS-462 - SOLD
Wifi adapter - SOLD
Control Panel - Need to break down, will list parts separately soon
GFCI circuit breaker - $30
DIY Glycol chiller (BCS controlled) - SOLD
DIY Stir plate - $30
5 Liter starter flask
2 Liter Starter flask
2 Still Dragon 2" Tri Clover adapters with 2 5500 watt heating elements and cable - $100
4 BCS Temp probes - SOLD
CIP system for corny and conical - SOLD
2 Vittles vault for grain storage - $20 each
2 Carboys - $15 each
Bench top capper - $30
hannah ph meter - $50
refractometer - $40
+ Everything needed to use all of this equipment (Tri clovers, butterfly valves, ball valves)
Overall system
Conical with psi gauge, ball lock adapter, butterfly valves, yeast harvester
HLT with two 2" ports (1 for element, 1 for included temp probe)
[imghttps://farm1.staticflickr.com/593/21841861740_48dbb058c4_z.jpg[/img]
MLT with bottom drain and false bottom
BK with whirlpool and two 2" ports
Monster Mill setup (Kennedy not included)
Control Panel
Hop Spider
Oxygen Setup
Chugger
Still dragon adapters with 5500 Watt elements
Keezer with stainless perlicks
$6500 takes every piece of brewing equipment out of my garage and into yours. It includes everything you need to brew. Even have a couple pounds of hops in the freezer. If you have a question about something I didn't list, just ask. I didn't list all of the tubing, tri clover connections, ball lock connectors etc., but its all here.
I put my heart and soul into researching and developing (I'm an R&D engineer by trade) this system, and I am sure the next owner will love it.
Hell, we can even brew the first batch together if you want me to walk you through it.
If I can't sell it all to one buyer, I will take offers on groups of items as long as it includes either the conical or the 3 stout pots.