What number should this be? I'm using Beersmith. My batch volume ended up lower than 5 gallons. Im going to find out how much i had and I want to plug in the numbers to beersmith to see how much corn sugar to use. But what should the desired co2 volume be?
Update:
Found out I measured about 24 ounces short of 5 Gallons. Wasn't as bad as I thought. But I came up with a volume of 4.81 gallons. After my hydrometer readings i figure I have about 4.75. So I put that into beersmith with the desired level of co2 at 2.4...which is what it was set to. i dont know if this is right or wrong.
but it says i should use 3.59 oz of corn sugar for bottling. Does this sound right?
Update:
Found out I measured about 24 ounces short of 5 Gallons. Wasn't as bad as I thought. But I came up with a volume of 4.81 gallons. After my hydrometer readings i figure I have about 4.75. So I put that into beersmith with the desired level of co2 at 2.4...which is what it was set to. i dont know if this is right or wrong.
but it says i should use 3.59 oz of corn sugar for bottling. Does this sound right?