Omron H5CX timer wiring help

I really have no clue on how to read electical scematics. Willing to learn though.

I have this timer, for a KAL clone build.

Trying to figure out how to convert the KAL one to this.

http://www.ia.omron.com/data_pdf/data_sheet/h5cx_dsheet_csm100.pdf

page 8.

Terminal Arrangement:
1 (- Power)
2 (+ Power)

Contact output (Think the lines on the page are trying to tell me something)
3 line going up and curved toward #4
4 line goes up 90 degree turn back to 3 then a 90 trun right going upwards till it hit the line from #5
5 up and then 90 degree turn back to #4

6 Input use O V
7 Reset
8 Signal
9 Gate
10-13 Unused.

Would anyone be able to help?

Thanks,

OK I think I got it. Watched a youtube video in German along with a bit of guesswork and guidance.

3 is the common
4 is the NO
5 is the NC

I connected the hot from the hot bus to #2. Connected #2 to #3. Then I connected #4 to the alarm.

Connected the neutral from the Alarm to #1. Connected #1 to the neutral bus.

Connected the reset button to #6 and #7.

Ignored all others.