As promised, I worked the measurements about half a page back into plans.
Code:
Lumber for Beer Crates (24x 12oz) Lumber for Beer Crates (12x 22oz)
================================= =================================
Interior: 15-1/2" W x 10-1/2" D x 9-1/4" H Interior: 11-3/4" W x 8-3/4" D x 11-1/2" H
Five 1x2 @ 17" (bottom slats) Five 1x2 @ 13-1/4" (bottom slats)
Four 1x2 @ 10" (vertical ends) Four 1x2 @ 12-1/4" (vertical ends)
Four 1x3 @ 10-1/2" (short sides) Four 1x3 @ 8-3/4" (short sides)
Four 1x3 @ 18-1/2" (long sides) Four 1x3 @ 14-3/4" (long sides)
Lumber for Beer Crates (12x WM Pint) Lumber for Beer Crates (12x WM Quart)
==================================== =====================================
Interior: 14-1/8" W x 10-5/8" D x 5" H Interior: 15" W x 11-1/8" D x 6-3/4" H
Five 1x2 @ 15-5/8" (bottom slats) Five 1x2 @ 16-1/2" (bottom slats)
Four 1x2 @ 5-3/4" (vertical ends) Four 1x2 @ 7-1/2" (vertical ends)
Four 1x3 @ 10-5/8" (short sides) Four 1x3 @ 11-1/8" (short sides)
Four 1x3 @ 17-1/8" (long sides) Four 1x3 @ 18" (long sides)
Lumber for Beer Crates (6x .5-Gal) Lumber for Beer Crates (12x 1L Teddy's)
================================== =======================================
Interior: 13-5/8" W x 9-1/8" D x 9-1/2" H Interior: 13-7/8" W x 10-3/8" D x 10-1/2" H
Five 1x2 @ 15-1/8" (bottom slats) Five 1x2 @ 15-3/8" (bottom slats)
Four 1x2 @ 10-1/4" (vertical ends) Four 1x2 @ 11-1/4" (vertical ends)
Four 1x3 @ 9-1/8" (short sides) Four 1x3 @ 10-3/8" (short sides)
Four 1x3 @ 16-5/8" (long sides) Four 1x3 @ 16-7/8" (long sides)
Will be building one of each today to test for fit before I start cranking them out tomorrow.
Also, built a few White Labs vial / 2L soda preform / baby soda bottle / test tube (many different names, I know) rack. Once I upgrade to the dedicated chest freezer for the brewery, at least one of these will be used for the yeast bank. I may make modifications.