jrpark22000
Active Member
- Joined
- Aug 1, 2007
- Messages
- 38
- Reaction score
- 0
Over the last few months I have been gathering parts. Construction is underway and I hope to have most of the intial build completed in a few weeks.
http://www.thefatmanbrewery.com/5.html
I have everything mapped out in Visio, have .xls parts list, plumbing diagrams, and was thinking of making a write up similar to the brutus ten. Would it be worth my time? Anybody interested in making thier own replica?
It will be feed with natural gas jet burners, and use 3 converted kegs. All the shelves are able to swivel 360deg and be full height adjustment. The 4th shelf is for the CFC chiller. The pump will be mounted on the base. Once the design has proven itself, I will grind down all the welds, bondo to make smooth, and paint.
Josh
http://www.thefatmanbrewery.com/5.html
I have everything mapped out in Visio, have .xls parts list, plumbing diagrams, and was thinking of making a write up similar to the brutus ten. Would it be worth my time? Anybody interested in making thier own replica?
It will be feed with natural gas jet burners, and use 3 converted kegs. All the shelves are able to swivel 360deg and be full height adjustment. The 4th shelf is for the CFC chiller. The pump will be mounted on the base. Once the design has proven itself, I will grind down all the welds, bondo to make smooth, and paint.
Josh