shanersnyder
Member
So it started out as buying a kegerator and that wasnt good enough, and the new house had a cutout from the previous owner who had a kitchenette. So here is the full bar build.
Beginning with the framing.
Another view
Its about 6' on the front and just over 3 on the short side.
I used 3/4" oak hardwood ply and 6" Red oak for the edging.
I bought a pocket hole jig and it really gave a good look to the joints.
Beginning with the framing.
Another view
Its about 6' on the front and just over 3 on the short side.
I used 3/4" oak hardwood ply and 6" Red oak for the edging.
I bought a pocket hole jig and it really gave a good look to the joints.