Hi all... We just made a Bell's 2 Hearted clone and had something weird happen...the brew shop in town suggested we halve the steeped liquid and then add back the removed half at the 10 min till end of boil. We separated half of the steep into a separate pot prior to boil, set aside, and re-added with 10 minutes left of the boil. Unfortunately, it had cooled to nearly room temp when we added it back into the boil, which made it stop boiling. We had to bring it all back up to a boil, which took about 10 mins, and start the last 10-minutes of boil time after that. There was a hop add at 10 till and then again at 5 mins till. After cooling the wort, it was very strangely stratified and cloudy; looked like nothing we'd seen before. When we poured it into the Primary, there was a decent amount of hops on the bottom, but what we poured into the Primary was real milky looking. Will this settle out in the Primary and not get siphoned off into Secondary? I used an Irish Moss tablet at the 10 min till moment, not sure if that's pertinent. Did I confuse anyone?? Thanks in advance! Brooda