hatfieldenator
Well-Known Member
- Joined
- Sep 15, 2010
- Messages
- 493
- Reaction score
- 18
I recently upgraded my system to a new control panel so I'm selling my previous controller here. This is a very simple, but functional panel and works very well. I've used it myself for dozens of brews and had great success. I did not build this controller myself, it was purchased from a local brewer who was getting out of the hobby as part of an all grain system that I'm still using. Its made of good, quality parts and has absolutely nothing wrong with it.
This is the perfect way to get started in electric brewing!
Here's the details:
-240V/5500Watt System
-2 PIDs (Omega brand) (one for controlling the heatstick, the other for monitoring a second temp. reading)
-Capable of firing 1 5500 watt heating element, but can easily be upgraded to control two.
-K type Thermocouplers included
-Output for 1 heating element and for 1 pump (120V)
-Panel is made of steel as shown in the pictures.
-Simple operation. PIDs are turned on/off with a flip of a switch. There is a seperate switch for turning the pump on/off
-Can be used to control a RIMS or HERMS set up. I used it as a HERMS controller and it did an excellent job! It is able to maintain temps PERFECTLY at whatever mash temp you desire
-As can be seen in the photo, there is plenty of room inside the panel to add a second SSR and heatsink for controlling another heating element for a boil kettle if desired
INCLUDED:
Control panel as shown, 2 Thermocouplers with easy disconnects, cords with plugs for the heating element and a pump.
Detailed instruction manual with original documents for the PIDs and all electric components and instructions on how it works
Hooks up to a standard 30A/240V outlet (cord attached and included)
Pictures:
Front
Inside
Outlets for heating element and pump (cords included)
Power Cord
Price is $350 plus actual shipping through UPS or FedEx
Paypal accepted
PM if interested
This is the perfect way to get started in electric brewing!
Here's the details:
-240V/5500Watt System
-2 PIDs (Omega brand) (one for controlling the heatstick, the other for monitoring a second temp. reading)
-Capable of firing 1 5500 watt heating element, but can easily be upgraded to control two.
-K type Thermocouplers included
-Output for 1 heating element and for 1 pump (120V)
-Panel is made of steel as shown in the pictures.
-Simple operation. PIDs are turned on/off with a flip of a switch. There is a seperate switch for turning the pump on/off
-Can be used to control a RIMS or HERMS set up. I used it as a HERMS controller and it did an excellent job! It is able to maintain temps PERFECTLY at whatever mash temp you desire
-As can be seen in the photo, there is plenty of room inside the panel to add a second SSR and heatsink for controlling another heating element for a boil kettle if desired
INCLUDED:
Control panel as shown, 2 Thermocouplers with easy disconnects, cords with plugs for the heating element and a pump.
Detailed instruction manual with original documents for the PIDs and all electric components and instructions on how it works
Hooks up to a standard 30A/240V outlet (cord attached and included)
Pictures:
Front
Inside
Outlets for heating element and pump (cords included)
Power Cord
Price is $350 plus actual shipping through UPS or FedEx
Paypal accepted
PM if interested