Greenlee 7/8" punch?

CornyKegs 728
Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
C

CJBrewVT

Well-Known Member
Joined
Feb 10, 2011
Messages
69
Reaction score
1
Location
Rutland
I really like these punches over a step bit but the 13/16" size doesn't work for bulkheads from Brewers Hardware. I've tried to find a 7/8" with no luck. At least one for stainless. Did find one for mild steel.

Anyone else try to find that size?
 
It is easier to find a 1/2" conduit punch. Its the same as a 7/8" radio chassis punch. Both make a 7/8" hole.
 
+1 on what OMJ said. I have a 1/2" greenlee conduit punch and it works great. So much better than drilling with a step bit. They make a very clean 7/8" hole. I just installed two valves and two thermometers on two keggles. Took me about 15 minutes for all.
 

Similar threads

Broken Crow
1/4" Swivel-nut > 3mm EVABarrier > 6.35mm Monotight connector > Duotight Shank
Replies
3
Views
631
Broken Crow
Broken Crow
G
Fermentis BR-8 dry Brettanomyces Experiences
2
Replies
62
Views
7K
Miraculix
Miraculix
EGorsel
My first beerbrew recipe - tips and tricks?
Replies
12
Views
1K
JaxBrewerSahti
JaxBrewerSahti
B
California Small kegs, mobile dispensing setup, electric brewing components.
Replies
1
Views
798
Whisky River
Whisky River
Gytaryst
First Brew in 5 years - I Have Questions
Replies
14
Views
934
Gytaryst
Gytaryst
CornyKegs 300

Latest posts

Back
Top