This weekend me, my wife and my cousin turned a used 20 c.f. chest freezer I got of craigslist into a Keezer. Here is the build, starting a little after the beginning. It wasn't until we had already gotten started that I decided to document the occasion.
Here is my cousin lining the door with plastic sheet. We took the plastic that was already on it out, to make the build easier, and it also took up too much room, looked ugly, and housed the defunct light.
We cut the sheet to size, and taped it to the lid with Gorilla Tape.
And then I decided to have a Pliny The Elder and brag about it.
Here is the collar. We used 3 inch screws to attach the 2x6's to each other, and then reinforced them with right angle decking brackets to reduce warping down the road.
Here is my cousin lining the door with plastic sheet. We took the plastic that was already on it out, to make the build easier, and it also took up too much room, looked ugly, and housed the defunct light.
We cut the sheet to size, and taped it to the lid with Gorilla Tape.
And then I decided to have a Pliny The Elder and brag about it.
Here is the collar. We used 3 inch screws to attach the 2x6's to each other, and then reinforced them with right angle decking brackets to reduce warping down the road.