Beersmith keggle BIAB profile.

Does anyone have a couple screenshots of their beersmith setup for a keggle BIAB equipment profile? I would be really greatful, All these numbers are driving me crazy.

Any luck finding one??? Im in the process of doing this as well. Been searching all over to get my equipment profile set up.

I'm interested in this too.. I've done several batches now, guessing, and am getting frustrated by not having this profile quite right..

I'm also interested in this... I'd rather not experiment and get poor results

Do you know your values for boil off ? I don't use beer smith but I have a program that uses my equipment profile and put 0.2 gallons absorbed by grain, mash temp max 158, I think 1 gallon loss to mash tun, put the BTU rating for my burner and guessed 74% efficient and 1 gallon boil off per hour. Pretty basic values and all you have to do is measure them when you brew. I measured grain absorption by pouring into fermentor buckets and I don't sparge (80% mash efficiency) so I ignore that number.

Not sure what beer smith asks for but those are usually equipment measurements from what I've learned.

This is what mine looks like. That said, I just moved to Beersmith from Brewers Friend myself and have only done one batch with this setup. It's going to take me a little more time to dial it in.

Equipment Profile: Lee's Keggle
Batch Size: 5.50 gal

Mash Tun Volume: 15.50 gal
Mash Tun Weight: 28 lbs
Mash Tun Specific Heat: 0.12
Lauter Tun Deadspace: 0.25 gal

Boil Size: 7.24 gal
Boil Time: 60 min
Evaporation Rate: 13.8 %
Calculate Boil Size: TRUE
Kettle Top Up Water: 0.00 gal
Hop Utilization Adjustment: 100.00 %

Trub/Chiller Loss: 0.50 gal
Cooling Loss: 4.00
Top Up Water into Fermenter: 0.00 gal

Created with BeerSmith 2 - http://www.beersmith.com